Description

Small Tips for YOU,please read before buying.

*Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.

*Don’t forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).

*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176℉)

Why choose Window Film?

Glue Free Design

Static cling window film, easy to install and remove in minutes with no residue. No harmful substance release.

Provide Privacy and Allow Light in

Provide semi privacy-keep birds from crashing and pets barking from seeing outside. No broken blind anymore.

Widely Application

Widely used on office,lounge,bedroom,bathroom,sliding doors or windows. Replace traditional curtains with this elegant and beautiful window film.

Size and Packaging

Size: 30/45/60/75/90x100cm/200cm Please measure and record the length and width of each piece of glass you plan to tint first. Suggest buy 5-15% more for waste or scrap.

Package: One continuous roll (not separate pieces) Include: Product; Installation tool We’ll package them line with EPE,outer layer of bubble film to protect them. Some special product will be protected by paper tube.

How to install window film?

1.Clean glass(make sure your glass is clean and smooth).

2.Wet glass(the more water,the better).

3.Cut the film into required size and peel off the transparent backing film.

4.Past the smooth side to glass.

5.Scraper the film from up to down,left to right.

6.Cut the excess film(leave a small gap about 1 cm between the film and window to let water flow out).

Questions & Answers

Q1:Why my window film can not cling?

A1:Have not wet the window with water, or have not removed the transparent backing film. Please don’t forget to remove the protective film or it will not cling.If you have removed the protective side,you may applied the wrong side. Please paste the smooth side to the window.

Q2:Why there are so many bubbles?

A2:Too less water. Please tear it down and spray a lot of water,the more water,the better.

Q3:Why the edge of my window film began to fell off?

A3:The edge of film is too close to the window. Please leave a small gap(about 1 cm )to let the water flow out so that the film can stick well.